gas welding
英 [ɡæs ˈweldɪŋ]
美 [ɡæs ˈweldɪŋ]
n. 气（乙炔）焊
双语例句
- Operators conducting operation with fire danger like electrical welding and gas welding or operators for automatic fire control system, must hold relevant certificates and strictly observe operation rules on fire control safety.
进行电焊、气焊等具有火灾危险的作业的人员和自动消防系统的操作人员，必须持证上岗，并严格遵守消防安全操作规程。 - Argon serves as a shielding gas to protect metals from oxidation during welding. Inert gas welding is the preferred method of joining several ferrous and nonferrous alloys.
焊接中，氩作为保护气防止金属氧化。惰性气体焊接是连接几种含铁和不含铁的合金的首选方法。 - The simulation of aluminum alloy plate tungsten inert gas welding ( TIG) process using finite element software-ABAQUS was researched.
利用ABAQUS有限元软件对铝合金平板钨极氩弧焊（TIG）焊接过程进行了数值模拟。 - Due the fact that the acetylene is not used, the gas welding device can be optionally loaded and conveyed to carry out the weld joint in the maintenance work.
因为不用乙炔所以该气焊设备可以任意装车搬运，进行维修工作中的焊接。 - Man-made static magnetic fields are generated wherever DC currents are used, such as in electric trains or industrial processes such as aluminium production and in gas welding.
在使用直流电的地方即产生人为的静电磁场，例如在电车或诸如铝生产和气焊等工业操作程序中。 - A working car with gas welding equipments.
一节载有气焊设备的工程车。 - Research on TIG welding arc with numerical simulation by using ANSYS Ultrasonic frequency pulse tungsten inert gas welding power source topology and welding applicability
基于ANSYS的TIG焊接电弧数值模拟研究超音频脉冲TIG焊电源拓扑及电弧焊适用性 - The control circuit of CO2 shielded gas welding of taped transformer in many factories is complex and has much more failure, is difficult to maintain.
多数厂家的抽头式CO2气体焊机控制电路复杂，故障率较高，维修较为繁琐。 - Filler rods for gas welding of mild steels and low alloy high tensile steels-Determination of mechanical properties of deposited weld metal
软钢、低合金高强度钢气焊用焊条－－堆焊金属的力学性能的测定 - Ultrasonic frequency pulse tungsten inert gas welding power source topology and welding applicability
超音频脉冲TIG焊电源拓扑及电弧焊适用性 - Gas welding shall not be used because of its excessive heat input.
由于其过热输入，不得采用气焊。 - An Application of Bar Mat Gas Welding Technique in Architectural Construction
钢筋气压焊接技术在建筑施工中的应用 - Galvanized sheet is readily spot-or seam-welded, but arc gas welding will boil off the zinc coating.
镀锌板上有焊点或焊缝，但是电弧焊会烧掉锌层。 - Liu master is operating the gas welding machine of the new system.
刘师傅正在操作一台新制的气焊机。 - However, gas welding equipment, a simple, flexible operation, convenient and easy to control the flame without power supply.
但是气焊设备简单、操作灵活方便，火焰易于控制，不需要电源。 - Oxygen/ fuel flashback arrester is a necessary safety apparatus during oxygen-fuel cutting, gas welding, iron and steel casting, and is widely applied in the transportation pipe, gas cutting and gas welding.
氧气、燃气回火防止器是氧-燃气气割、气焊、钢铁连铸等热加工过程中必备的劳动安全防护装置，在氧气和燃气输送管道、气割、气焊中大量使用。 - Improvement for joint design of co_2 shielding gas welding
CO2气体保护焊接头设计改进 - The application of liquefied petroleum gas on gas welding and gas cutting
液化石油气在气焊、气割中的应用 - Focused on the application of magnesium alloy welding materials, this paper researched the preparation process of Mg welding wire and explored the tungsten inert gas welding process with filler wire of magnesium alloys butted plates.
本文紧密结合镁合金焊接材料在实际焊接中的应用，研究了镁合金焊丝的制备工艺，并采用填丝TIG焊接方法，完成了镁合金板材的对接连接。 - Making an Investigation on Repair Welding Aluminium Alloy with Gas Welding
对气焊焊补铝合金的探索 - In the application of the north-industry fuel gas, there is also a need for gas welding technics.
在北方工业燃气（简称北方气）的应用中，同样要求具有气焊工艺性能。 - This paper introduces the repair welding procedure for repairing an alumal casting piece of an oil pump cylinder, This method covers the shortages of AC argon arc weld and gas welding.
介绍了对油泵机缸体铝锰合金铸造件缺陷补焊修复的技术工艺，且弥补了若采用交流氩弧焊和气焊施焊时存在的不足。 - Advantage of using argon gas welding to weld the stainless steel screen
使用氩弧焊焊接不锈钢条缝筛板的优越性 - Investigation and Development of Numerical Simulation of High-pressure Tungsten Inert Gas Welding Arcs
高压钨极氩弧焊焊接电弧行为数值模拟的研究现状与发展 - The shielding gas of 20% CO2+ 80% Ar weld shape than that of pure Ar. Two protective gas welding heat affected zone of pearlite+ ferrite, no hardened organizations.
保护气体为20%CO2+80%Ar的焊缝成形比纯Ar的好。两种保护气体下的焊接和热影响区组织都为珠光体+铁素体，没有出现淬硬组织。 - Metal inert gas welding ( MIG) is widely used in pipeline welding.
熔化极惰性气体保护焊（MIG）广泛的应用于管道焊接中。 - At present, when the gas welding machine, with application of a wide range in Chinese railway industry, welded joints, its quality can be affected by many factors, especially by human.
目前，在中国铁路行业应用广泛的移动式气压焊轨机焊接接头质量影响因素多，特别是受人为因素影响大的缺点。 - In modern industry, the metal inert gas welding is a widely used welding method, which can almost weld all metals. It has many advantages, such as high efficiency, good welding quality, and easy to realize automation.
在现代工业生产中，熔化极惰性气体保护焊是一种广泛采用的焊接方法，几乎可以焊接所有的金属材料，具有焊接生产效率高、焊接质量好、易于实现自动化等优点。